Category:PCB PCB Stack-up

Group Administrators: 0 | Group Member: 10 | Group Threads: 5

PCB stack-up is an important factor in determining the EMC performance of a product, very effective in reducing radiation from the loops on the PCB.

Post A Thread
Search Results: 5 Threads,1 Pages
0 answers
436 views

Talk Something about Multilayer PCB

Days ago, one of our customer sent us an e-mail and asked something about multilayer PCB and many customers will send us e-mail in order to get the stack-up of our multilayer PCB. And we upload this p... (See More)

Lesley Manley
2019-01-04 16:02:11
0 answers
292 views

Core PCB Board Stack Up Technology

First, Introduction   For the production of core boards, press-fitting is the most important process. There are many problems in the production process that are worthy of resear... (See More)

Numan
2018-12-26 14:48:23
1 answers
1893 views

4 and 6 layers boards stackup for standard 1.6 mm boards

Here are the pictures of layer stackup for 4 layer pcb and 6 layer pcb boards for standard 1.6 mm boards. I got them from one PCB manufacturer. By these pictures, I could clearly know prepreg material... (See More)

Eibert Draisma
2017-04-11 11:55:21
David
2017-04-11 14:05:42
1 answers
1417 views

Guides for 10-Layer PCB Stack-up

A ten-layer board should be used when six routing layers are required. Ten-layer boards, therefore, usually have six signal layers and four planes. Having more than six signal layers on a ten-layer bo... (See More)

Bevis
2017-02-19 14:44:43
Bruno
2017-02-21 14:44:43
1 answers
2596 views

The tips for a good PCB Stack-Up

PCB stack-up is an important factor in determining the EMC performance of a product. A good stack-up can be very effective in reducing radiation from the loops on the PCB (differential-mode emission),... (See More)

Boyce
2017-01-31 20:59:00
Michele Perniola
2017-02-02 20:59:00
Post A Thread
Search Results: 5 Threads,1 Pages